Gunsmith Punches Technical Info
| Page 2
|
|
|
 Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2"x.091" Technical Info
USD 14.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-509-691.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch Set Of 3 W/2 1/2" Pins Technical Info
USD 24.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-507-050.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 7/32" Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52583.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Dovetail Sight Punch Dovetail Rear Sight Punch Technical Info
USD 11.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front sight punch has a base width of approximately .280"; rear sight punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy kit. The small dovetail sight punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns. Mfg: brownells. High quality gunsmith punches by Brownells. Manufacturer item ID: DTRSP.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 5/32" Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52581.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Starter Punches #5 Punch Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Mfg: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2mm); #3, 3/32" (2.4mm), #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); 7/32" (5.5mm); #7, 7/32" (5.5mm). High quality gunsmith punches by Brownells. Manufacturer item ID: 25034939.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Hole Center Punches #10 Hole Center Punch Technical Info
USD 3.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: 3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base; drill and tap first hole; re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Mfg: brownells specs: 2-βύ" (7.0cm) long. ß?" (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-732-010.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Holders 3/32" Diameter Roll Pin Holder Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the usa. Mfg: brownells. High quality gunsmith punches by Brownells. Manufacturer item ID: B332RSH.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Brass Punch Set 1/16" (1.6mm) Brass Pin Punch Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Mfg: grace usa specs: brass, 5⁄16" (7.9mm) hex stock. Punch set, 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High quality gunsmith punches by Grace. Manufacturer item ID: 116BPP.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Alignment & Push Punches .092" Diameter Brass Technical Info
USD 8.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste mfg: brownells specs: handle, plastic. Shank, unhardened steel drill rod, or 360 alloy brass . 3ß?" (8.2cm) long. Oal, 4βύ" (12.1cm) long. Alignment/push punch set, contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High quality gunsmith punches by Brownells. Manufacturer item ID: 080-000-024.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 3/16" Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52582.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Roll Pin Tool For Gas Block Technical Info
USD 12.5
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Ingenious tool holds the tiny gas tube roll pin securely to make installation easy and fast. No more fumbling with needle nose pliers or tweezers, only to have the pin fly fly off and get lost! pin is pressed into the tool for a rock-solid hold while the tapered tip enables precise control and correct placement. Safely gets the pin partially in, so the job can be finished with a normal roll pin punch. All-steel construction, matte black oxide finish. Mfg: geissele automatics llc. High quality gunsmith punches by Geissele. Manufacturer item ID: 10225.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Gas Block Punch Kit Technical Info
USD 24.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The geissele gas block pin punch set are made speccifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block on an ar-15/ar-308. Removal of a rusted in gas block roll pin has always been a challenge. The geissele punch set make gas block work a whole lot easier. Mfg: geissele automatics llc. High quality gunsmith punches by Geissele. Manufacturer item ID: 15172.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Master Punch Set Technical Info
USD 109.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The punches in this master set were specifically chosen for the professional gunsmith. We handpicked high quality punches and added a nylon bench block, nylon/brass hammer, and neoprene gun mat, then packed them in a durable polyethylene case for easy access and storage in the shop. Features (4) premium quality starter punches to break loose stuck or tight pins, (4) pin punches with hardened points that won't bend, (1) prick punch for marking spots before center punching, and (1) center punch for starting holes before drilling. Also includes (4) premium brass punches for drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference betwee mfg: brownells specs: polyethylene case, 14" (35.6cm) long, 9" (23cm) wide, 1-7⁄8" (4.7cm) high. Pin/starter punches, tool steel, knurled body. 4" (10.2cm) long x 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 5⁄32" (4mm) dia. Center punch, t. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-000-569.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Roll Pin Punches 3/16" Punch Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: grace usa specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Grace. Manufacturer item ID: 632RS.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Set A Technical Info
USD 46.69
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-620-103.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52584.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Brass Punch Set 3/32" (2.4mm) Brass Pin Punch Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Mfg: grace usa specs: brass, 5⁄16" (7.9mm) hex stock. Punch set, 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High quality gunsmith punches by Grace. Manufacturer item ID: 332BPP.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Brass Punch Set Technical Info
USD 119.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision machined, non-marring brass punches drift sights and drive pins without risk of damage to the sight, pin, or firearm. We combined 20 of our most popular non-marring brass punches, added a compact bench block and came up with a great addition for the work bench. Features (4) starter punches, (8) roll pin punches, and (8) standard punches for a variety of different jobs. Delrin bench block holds and organizes all 20 punches for easy access, plus is resistant to most solvents. Starter punches are used to start the removal of steel or aluminum pins. Short, tapered shaft is extra stiff to prevent bending and twisting. Roll pin punches feature a special tip that centers inside the h mfg: brownells specs: brass. Starter punches, contains (1) of each diameter: 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 5⁄32" (4mm). Roll pin punches, contains (1) of each diameter: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16". High quality gunsmith punches by Brownells. Manufacturer item ID: 080-000-649.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Gunsmith Punch Set Technical Info
USD 26.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Quality steel punches with hardened steel punch tips and knurled steel handles. Set includes sizes 1/16, 3/32, 1/8, 5/32, and 3/16 in. Punches; 1/8 in center punch; brass drift punch; storage block. Works well in conjunction with the brass tapper above. Mfg: lyman. High quality gunsmith punches by Lyman. Manufacturer item ID: 7031273.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Punches Kit Technical Info
USD 45.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Mfg: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2.0mm); #3, 3/32" (2.4mm); #4, 1/8" (3.2mm); #5, 5/32" (4.0mm); #6, 3/16" (4.8mm); #7, 7/32" (5.5mm). High quality gunsmith punches by Brownells. Manufacturer item ID: 230-100-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 5/64" Roll Pin Starter Punch Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Brownells. Manufacturer item ID: 564SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch Set #565 Technical Info
USD 62.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52586.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Punches Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
