Gunsmith Punches Technical Info
| Page 7
|
|
|
 Brownells Premium Roll Pin Holders 3.5mm Diameter Roll Pin Holder Technical Info
USD 4.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the usa. Mfg: brownells. High quality gunsmith punches by Brownells. Manufacturer item ID: B35RSH.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Brass Punch Set 5/16" (7.9mm) Brass Pin Punch Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Mfg: grace usa specs: brass, 5⁄16" (7.9mm) hex stock. Punch set, 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High quality gunsmith punches by Grace. Manufacturer item ID: 516BPP.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Model 2 .066" (1.7mm) Diameter/Long Length Technical Info
USD 17.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-620-002.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 7/32" Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52583.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2 1/2"x.091" Technical Info
USD 15.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-510-691.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Set B Technical Info
USD 47.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-620-203.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Nylon/Brass Drift Punch Remington Shotgun Non Marring Nylon Punch Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di mfg: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1βό" (3.2cm) long. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-001-224.
More Details : click here
SEARCH this site : click here
|
|
|
Gauge Rite Products Top Dead Center Punch Technical Info
USD 37.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The tdc is a rugged, foolproof tool to end the problems of off-center-work, broken taps and drills that come about from trying to "eyeball" top dead center on gun barrels or other round stock. Simple to use, just level and plumb the rifle on the drill press, place tdc on barrel or receiver, level the bubble and tap the punch. The punch mark is top dead center. Precision made; shockproof level. Mfg: gauge-rite products specs: body, 1-15/16" (23.8mm) x 1-β½" (3.8mm) x 1" (2.5cm), aluminum. Punch, βό" (6.3mm) diameter tool steel. Locating rod, 5-β½" (14cm) long. High quality gunsmith punches by Gauge-Rite. Manufacturer item ID: 871-100-000.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 1/16" Technical Info
USD 8.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches by Starrett. Manufacturer item ID: 52578.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Model 7 3mm (.118") Diameter/Long Length Technical Info
USD 12.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. High quality gunsmith punches by Brownells. Manufacturer item ID: SML004257.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Punches 7/32" Roll Pin Punch Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Brownells. Manufacturer item ID: 732RSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Model 3 .072" (1.8mm) Diameter/Long Length Technical Info
USD 17.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. High quality gunsmith punches by Brownells. Manufacturer item ID: 080-620-003.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 1/8" Roll Pin Starter Punch Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Brownells. Manufacturer item ID: 432SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Punches #7 Roll Pin Punch Technical Info
USD 8.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Mfg: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2.0mm); #3, 3/32" (2.4mm); #4, 1/8" (3.2mm); #5, 5/32" (4.0mm); #6, 3/16" (4.8mm); #7, 7/32" (5.5mm). High quality gunsmith punches by Brownells. Manufacturer item ID: 25006939.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Starter Punches #6 Punch Technical Info
USD 3.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Mfg: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2mm); #3, 3/32" (2.4mm), #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); 7/32" (5.5mm); #7, 7/32" (5.5mm). High quality gunsmith punches by Brownells. Manufacturer item ID: 25035939.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 3/32" Roll Pin Starter Punch Technical Info
USD 3.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Brownells. Manufacturer item ID: 332SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Punches 5/32" Roll Pin Punch Technical Info
USD 3.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Brownells. Manufacturer item ID: 532RSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 7/32" Roll Pin Starter Punch Technical Info
USD 3.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Brownells. Manufacturer item ID: 732SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Roll Pin Punches 5/32" Punch Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: grace usa specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches by Grace. Manufacturer item ID: 532RS.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Punches Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
