Handgun Barrels Technical Info
| Page 6
|
|
|
 Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .38 Super Fits N/R Technical Info
USD 227.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. High quality handgun barrels by Kart. Manufacturer item ID: 472-000-001.
More Details : click here
SEARCH this site : click here
|
|
|
Nowlin 9mm Stainless Steel 1911 Pre Fit Match Grade Barrel 4.25" Ramped 9mm Ramped 4 1/4" Technical Info
USD 185.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The easiest way to install the superb performance of nowlin's ecm match-grade barrels in your 1911 auto. Barrel kit comes complete with a pre-fitted, stainless steel bushing, barrel link and pin with little-to-no fitting required for installation. Barrels feature pre-fitted hood, top lugs and bottom feet that give a very close fit for increased accuracy in most 1911 autos. Includes factory-standard link and hardened, oversize pin. Mfg: nowlin specs: 416 stainless steel, heat treated to rc 40. Barrel, 6" (15.2cm), 5" (12.7cm) or 4βό" (10.8cm) long, .581" (14.7mm) o.D. Available ramped or non-ramped in calibers listed. Bushing, .582" (14.8mm) i.D., .701" (17.8mm) o.D. Link, .278" c-to-c. High quality handgun barrels by Nowlin. Manufacturer item ID: RB4PF.
More Details : click here
SEARCH this site : click here
|
|
|
Bar Sto Precision Machine 1911 Match Fit Barrels 1911 Govt 5" Match Fit 9mm Barrel P/C Technical Info
USD 231.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: These 1911 government 5" barrels are "match fit", meaning they are oversized in various areas and need to be machined to fit. Recommended for only qualified, experienced gunsmiths. Barrels come with barrel link, bushing, & link pin. 45acp barrel is non-ramped. 9mm barrels are available with a wilson/nowlin (w/n) or para/clark (p/c) ramp. Bar-sto precision machine has been making some of the finest auto-pistol barrels since 1971. Bar-sto barrels have been used by the u.S. Marine corps marksman unit since 1977. All bar-sto pistol barrels are machined from solid 416 stainless steel bar stock which has been heat treated 39 to 43 rc and 180, mfg: bar-sto precision machine specs: fits, 1911 government with a 5" slide. Construction, stainless steel, hardened to 39 to 43 rc. Includes, barrel, bushing, link & link pin. High quality handgun barrels by Bar-Sto. Manufacturer item ID: 100-015-622.
More Details : click here
SEARCH this site : click here
|
|
|
Storm Lake Barrels For Glock 45acp 5.30"(13.5cm) For Glock 21 .578 28 Thread W/Protector Technical Info
USD 149.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Machined 416r stainless steel hardened to 40-42 hrc for long life cut broached rifling that accepts both jacketed and lead bullets barrels are chambered for full case support easy drop in upgrade with occasional minor fitting required includes manufacturer's guarantee glock owners, look at what the storm lake barrels can do for your pistol! barrel attachments need solid threading at the end of the barrel to function properly. Each barrel is machined from 416r stainless steel and hardened to 40-42hrc and then cut broached rifled which means that you can now safely fire not only jacketed bullets but also lead. Made in the usa by storm lake barrels. Mfg: storm lake. High quality handgun barrels by Storm Lake. Manufacturer item ID: 34021.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 Drop In Match Barrels 9mm 1911 Commander Drop In Match Barrel 9mm 4.25" Technical Info
USD 184.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Cnc machined with slightly oversized dimensions for tighter barrel lockup and a "match quality", drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting. Mfg: ed brown. High quality handgun barrels by Ed Brown. Manufacturer item ID: 92439MM.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Mid Line Barrel G17 Titanium Nitride Technical Info
USD 200
(Indicative price - actual current price possibly lower)
Item technical details & specifications: For high-volume shooters with a glock g17, the agency arms non-threaded mid line barrel has a number of features that will improve your time on the range. The agency arms non-threaded mid line barrel uses 416r stainless-steel in its construction, ensuring that corrosion and excess wear won't impact your gun's performance. Rifling performed with pulled broach optimized for 9mm with 1:10 twist rate barrel measures 4.49 inches in length titanium nitride finish the agency arms non-threaded mid line barrel incorporates gear-style fluting around the outside of the barrel to provide enhanced cooling properties while shooting. Mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: NT2G17TN.
More Details : click here
SEARCH this site : click here
|
|
|
Storm Lake 1911 Pre Fit Barrel Kit 45acp 4.25" Barrel For Commander Technical Info
USD 208.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Save time and gain accuracy when re-barreling your 1911 auto. Includes stainless steel or black isonite, match-grade barrel complete with prefitted bushing, link and pin that makes building an accurate pistol faster and easier. Locking lugs and barrel hood are sized to require little to no gunsmithing to fit most slides. .45acp threaded models have .578-28 threads and 9mm models have 1/2"-28 threads. Government and commander model in .45 acp and 9mm. Officer available in .45 acp only. Has standard(non-ramped) barrel. Mfg: storm lake specs: 416 stainless steel barrel, bushing, link and pin. .45 acp or 9mm. Wilson/nowlin ramp. High quality handgun barrels by Storm Lake. Manufacturer item ID: 34075.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Standard Line Barrel G19 Black Nitride Technical Info
USD 160
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The agency arms non-threaded standard line barrel is an easy upgrade for any oem glock pistol barrel, offering a number of features. The agency arms non-threaded standard line barrel provides users with a long barrel life and corrosion resistance, due to its 416r stainless-steel construction. Rifled with pulled broach method rifling measures 1:10 twist overall barrel length is 4.02 inches black nitride finish the agency arms non-threaded standard line barrel features a clean look, with only caliber and company information printed on the breech block. Mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: NT1G19BN.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Standard Line Barrel G17 Black Nitride Technical Info
USD 160
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The agency arms non-threaded standard line barrel is an upgrade option for any standard glock g17 barrel, featuring a number of improved features. The agency arms non-threaded standard line barrel is constructed from stainless steel for added strength and corrosion resistance. Features pulled broach rifling 1:10 twist rate 4.49 inches in length black nitride finish the agency arms non-threaded standard line barrel does not exceed the boundaries of the slide and features stampings of the caliber and an "a" on the rear of the barrel. Mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: NT1G17BN.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells S&W M&P 9mm Full Size Barrels S&W M&P Full Size Barrel 9mm Black Technical Info
USD 126.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Brownells s&w m&p 9mm full-size barrels offer an unprecedented level of versatility and service life for owners of smith & wesson's popular m&p pistols, giving them drop-in barrels that renew worn-out pistols. The brownells s&w m&p 9mm full-size barrels are all constructed in the usa, made from stainless-steel bar stock that comes 416-r certified and stress-relieved. The barrels are all rifled with a conventional land-and-groove design. Barrel rifled with 1:10 twist rate suppressor ready with 1/2x28 tpi threaded muzzle 11-degree target crown contributes to accuracy nitride treatment adds corrosion resistance brownells s& mfg: brownells. High quality handgun barrels by Brownells. Manufacturer item ID: BNMPB910NFSNOQ.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Technologies Match Barrels For G17 & G19 Match G17 Barrel Stainless Technical Info
USD 237.5
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Zev technologies match grade drop-in glock replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416r) that was originally designed for use in match grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. Zev match grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 ra is reached. During this process the barrels are held to a final dimension of /- 0.0002" for consistency and accuracy. The barr mfg: zev technologies. High quality handgun barrels by ZEV. Manufacturer item ID: BBL17D.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 Drop In Match Barrels 1911 45acp Commander Barrel Technical Info
USD 179.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Cnc machined with slightly oversized dimensions for tighter barrel lockup and a "match quality", drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting. Mfg: ed brown specs: t-416 ss, cut rifled, rc 38-42. 3.5" (8.89 cm), commander (co), 4.25" (10.8cm), government model (gm), 5" (12.7cm) long. High quality handgun barrels by Ed Brown. Manufacturer item ID: 924345.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 Drop In Match Barrels .38 Super 1911 Government Drop In Match Barrel .38 Super 5" Technical Info
USD 182.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Machined to slightly oversized dimensions for tight barrel lockup and a "match quality" fit, ed brown's .38 super drop-in match barrels are machined from premium 416 stainless steel bar stock, heat-treated for hardness, and cryo stress-relieved before final rifling to deliver excellent accuracy and long barrel life. Precision broach-cut rifling gives outstanding accuracy with all bullet types, including lead. Outside barrel dimensions are cut to the maximum tolerance, requiring less fitting and more accuracy. Minor gunsmith fitting may still be required. The complete .38 super drop-in barrel kit includes the barrel itself, bushing, link, and link pin for fast installation. Available for mfg: ed brown. High quality handgun barrels by Ed Brown. Manufacturer item ID: 92538.
More Details : click here
SEARCH this site : click here
|
|
|
Glock M16x1lh Threaded Barrel With Protector For Glock 21 M16x1lh Threaded Bbl With Protector For Glock 21 Technical Info
USD 191.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The glock g21 m16x1lh threaded barrel is the perfect addition to glock pistols chambered in the suppressor-friendly .45 acp cartridge, enabling users to attach a suppressor to the muzzle easily. The glock g21 m16x1lh threaded barrel features the same construction as oem glock pistol barrels, ensuring that owners receive the same performance characteristics out of their new barrel as they found in their old one. Included thread protector chambered in .45 acp barrel length: 4.49 inches the glock g21 m16x1lh threaded barrel also features a 9.84-inch right-hand twist rate, which ensures that the pistol will perform with a wide range of different ammunition option mfg: glock. High quality handgun barrels by Glock. Manufacturer item ID: 39895.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Sig P320 9mm Full Size Barrels Sig P320 Full Size Barrel 9mm Black Technical Info
USD 126.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Brownells sig sauer p320 9mm full-size barrels provide a new level of aftermarket support for owners of sig's popular modular pistol platform, giving them the chance to do more and perform better with their handgun. The brownells sig sauer p320 9mm full-size barrels are completely made in the united states from solid bar stock of 416-r certified stainless steel. The steel is completely relieved of all stresses and are threaded for suppressor use. Rifled with 1:10 twist rate features 11-degree target crown thread pitch: 1/2x28 tpi nitride-treated for corrosion resistance the brownells sig sauer p320 9mm full-size barrels also features conventional l mfg: brownells. High quality handgun barrels by Brownells. Manufacturer item ID: BN320B910NFSNO.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Threaded Mid Line Barrel G17 Stainless Steel Technical Info
USD 210
(Indicative price - actual current price possibly lower)
Item technical details & specifications: There are multiple benefits to incorporating an agency arms threaded mid line barrel into any glock g17 pistol, in addition to its suppressor-ready capabilities. The agency arms threaded mid line barrel features 416r stainless construction, ensuring that outside factors, like moisture, won't contribute to barrel corrosion. Rifled with pulled-broach method utilizes 1:10 twist rate muzzle threaded with 1/2"x28 tpi thread pitch stainless steel finish the agency arms threaded mid line barrel features an all-natural finish that gives pistols an attractive contrasting finish. Mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: T2G17SS.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Standard Line Barrel G34 Black Nitride Technical Info
USD 160
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The agency arms non-threaded standard line barrel allows owners of the glock g34 to add some upgraded features to their pistol. The agency arms non-threaded standard line barrel uses 416r stainless steel in its construction, providing extra protection against barrel degradation from use and moisture. Pulled broach used in rifling features a 1:10 barrel twist rate total barrel length is 5.32 inches black nitride finish fits: glock34 gen 1-4 the agency arms non-threaded standard line barrel provides g34 owners with a slick modern look, featuring a muzzle that sits flush with the slide and subtle caliber and company markings machined into the b mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: NT1G34BN.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Handgun Barrels Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
