Brownells S&W M&P 9mm Full Size Barrels S&W M&P Full Size Barrel 9mm Black Technical Info
Handgun Barrels by Brownells
|
Item technical details & specifications: Brownells s&w m&p 9mm full-size barrels offer an unprecedented level of versatility and service life for owners of smith & wesson's popular m&p pistols, giving them drop-in barrels that renew worn-out pistols. The brownells s&w m&p 9mm full-size barrels are all constructed in the usa, made from stainless-steel bar stock that comes 416-r certified and stress-relieved. The barrels are all rifled with a conventional land-and-groove design. Barrel rifled with 1:10 twist rate suppressor ready with 1/2x28 tpi threaded muzzle 11-degree target crown contributes to accuracy nitride treatment adds corrosion resistance brownells s& mfg: brownells. High quality handgun barrels by Brownells. Manufacturer item ID: BNMPB910NFSNOQ.
 Indicative Price: USD 126.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Sti 1911 Bull Barrel 5" .400 Bull Barrel Technical Info
USD 218.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: Eliminates the barrel bushing for increased lockup area and improved accuracy. Machined from billet forging, button rifled and air gaged to ensure exact bore size and finish. Fully ramped with wilson/nowlin-style ramp for reliable feeding. Extra material at feed ramp, hood, locking lugs and muzzle allow precise fitting. Barrels are supplied with a generic short chamber which can be opened up to accept any of the popular pistol cartridges. Mfg: sti specs: 416 stainless steel. Installation requires machining of frame. All have .697" (17.7mm) muzzle diameter. Available in 5" (12.7cm) and 6" (15.2cm) lengths. High quality handgun barrels by STI. Manufacturer item ID: 2.00504E+12.
More Details : click here
SEARCH this site : click here
|
|
|
Nighthawk Custom 1911 Match Grade Barrel & Bushing Commander Match Grade Barrel/Bushing Technical Info
USD 189.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: Premium-quality, .45acp barrel is precision machined from solid 416 stainless steel barstock to tolerances /- .001" or less in critical areas. Heat treated to rc 40-42 to maintain those dimensions, even under the battering of hard competition. These unramped barrels are broach rifled with a left-hand 1-16" twist. Some fitting required, so you can produce a tight, no-play fit for maximum accuracy from your gun. The match grade bushing is machined from the same premium-grade stainless steel, with i.D. And o.D. Left slightly oversized to allow custom fitting to your barrel, further ensuring precise lockup and excellent accuracy. Mfg: nighthawk custom specs: 416 stainless steel. Rc 40-42. .45acp, 1-16" twist, left hand. Govt. Barrel: 5" (12.7cm) long. Bushing: .829" long (21.1mm) long, .573" (14.6mm) i.D., .698" (17.7mm) o.D. Commander, 4.250". Bushing: .515" (13.1mm) long, .573" i.D., .6. High quality handgun barrels by Nighthawk. Manufacturer item ID: SP0025.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 6" 9mm Wilson/Nowlin Ramp Barrel Technical Info
USD 205.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. High quality handgun barrels by Kart. Manufacturer item ID: 472-000-015.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc Semi Drop In 40 9 Conversion Barrel For S&W M&P 5.00" Technical Info
USD 189.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: The apex tactical semi drop-in 40-9 conversion barrel is the quick-and-easy way to get an s&w m&p that shoots readily available, cheaper, lighter-recoiling 9mm luger ammo without having to buy a whole new gun. These stainless steel barrels are designed to deliver exceptional accuracy, and they will simply drop into most guns and be ready to shoot. But sometimes minor fitting may be required, hence, they're called "semi drop-in." when properly installed in a properly functioning s&w m&p, an apex tactical semi drop-in 40-9 conversion barrel is capable of producing 1-1/2" groups at 25 yards from a rest. 9mm m&p magazine is required to co mfg: apex tactical specialties inc. High quality handgun barrels by Apex. Manufacturer item ID: 105056.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .40 S&W Fits W/N Technical Info
USD 241.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. High quality handgun barrels by Kart. Manufacturer item ID: 472-002-040.
More Details : click here
SEARCH this site : click here
|
|
|
Silencerco Hk Vp9 Threaded Barrel 9mm 1/2x28 Hk Vp9 Threaded Barrel Ss 1/2"x28 Technical Info
USD 148.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: Silencerco's threaded replacement barrel is everything you need to convert your 9mm hk vp9 to accept a silencer or other muzzle device. Precision machined to factory dimensions, the silencerco hk vp9 replacement barrel has β½"-28 muzzle threads compatible with most 9mm pistol suppressors. Fits 9mm chambered hk vp9 with 4-1/2" barrel 1-10" rh rifling 416r stainless steel with the silencerco hk vp9 threaded replacement barrel, you can easily upgrade your pistol for use with a wide variety of popular sound suppressors (muzzle brakes and comps, too). Mfg: silencerco. High quality handgun barrels by Silencerco. Manufacturer item ID: AC1549SS.
More Details : click here
SEARCH this site : click here
|
|
|
Victory Barrel For Glock 17 Black Threaded Technical Info
USD 189.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: The victory first barrel for glock 17 is a premium quality drop-in replacement for your oe barrel. It is precision machined from 416r steel and then nitride finished for unmatched durability and strength. The victory first barrel for glock 17 was designed by matt jacques, internationally known firearms trainer and consultant, and features a laser engraving of his badge and logo. This barrel is designed from the ground up to perform to the highest level of excellence. Drop-in replacement 1:10 right hand twist black nitride finish the victory first barrel for glock 17 is purpose built to provide confidence for the shooter by eliminating concern over accuracy a mfg: victory first. High quality handgun barrels by Victory First. Manufacturer item ID: VBG17GEN3BT.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 45 Acp Suppressor Ready Threaded Barrels 1911 45 Acp 4.25" Commander Threaded Barrel Technical Info
USD 249.99
(Indicative price - actual current price possibly lower)
Handgun Barrels Technical Info
Item technical details & specifications: Identical to the standard drop-in ed brown barrel, but longer length and threaded for use with suppressors. Thread size is 0.578 x 28 tpi rh. Includes link, link pin, bushing and thread protector. Barrel accuracy comes from using the highest quality materials and manufacturing methods. Ed brown products is committed to both. The barrels are made from t-416 modified, gun barrel quality stainless steel bar stock, just like a benchrest rifle barrel. T-416 is certified pure, there are no foreign materials, and no hard or soft spots to worry about. It is stress-relieved and heat-treated prior to final rifling and refinishing. Ed brown barrels are precision machine cut from a 3 mfg: ed brown specs: fits, government or commander slides. Chambered in 45acp, with a 1-16 twist. Muzzle threads are 0.578x28 threads per inch. High quality handgun barrels by Ed Brown. Manufacturer item ID: 924345SR.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells S&W M&P 9mm Full Size Barrels S&W M&P Full Size Barrel 9mm Black Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
