Handgun Barrels Technical Info
| Page 9
|
|
|
 Ed Brown 1911 Drop In Match Barrels .38 Super 1911 Commander Drop In Match Barrel .38 Super 4.25" Technical Info
USD 182.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Machined to slightly oversized dimensions for tight barrel lockup and a "match quality" fit, ed brown's .38 super drop-in match barrels are machined from premium 416 stainless steel bar stock, heat-treated for hardness, and cryo stress-relieved before final rifling to deliver excellent accuracy and long barrel life. Precision broach-cut rifling gives outstanding accuracy with all bullet types, including lead. Outside barrel dimensions are cut to the maximum tolerance, requiring less fitting and more accuracy. Minor gunsmith fitting may still be required. The complete .38 super drop-in barrel kit includes the barrel itself, bushing, link, and link pin for fast installation. Available for mfg: ed brown. High quality handgun barrels by Ed Brown. Manufacturer item ID: 924338.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 Drop In Match Barrels 9mm 1911 Commander Drop In Match Barrel 9mm 4.25" Technical Info
USD 184.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Cnc machined with slightly oversized dimensions for tighter barrel lockup and a "match quality", drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting. Mfg: ed brown. High quality handgun barrels by Ed Brown. Manufacturer item ID: 92439MM.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc Smith & Wesson M2.0 Semi Drop In Barrel Technical Info
USD 189.95
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The apex tactical semi drop-in 9mm barrel for the smith & wesson m&p m2.0 compact can dramatically improves the accuracy of your pistol. Accuracy tests with the semi drop-in 9mm barrel for the smith & wesson m&p m2.0 compact have achieved groups as small as 1-1/2" at 25 yards. Your performance may vary depending on ammunition, variations in factory firearms tolerances, and your skill. Precision-machined stainless steel 1-10" rifling best performance with 115 to 147 grain jacketed bullets the apex tactical semi drop-in 9mm barrel for the smith & wesson m&p m2.0 compact should, as the name indicates, drop right into most pistols mfg: apex tactical specialties inc. High quality handgun barrels by Apex. Manufacturer item ID: 105049.
More Details : click here
SEARCH this site : click here
|
|
|
Victory Barrel For Glock 17 Black Threaded Technical Info
USD 189.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The victory first barrel for glock 17 is a premium quality drop-in replacement for your oe barrel. It is precision machined from 416r steel and then nitride finished for unmatched durability and strength. The victory first barrel for glock 17 was designed by matt jacques, internationally known firearms trainer and consultant, and features a laser engraving of his badge and logo. This barrel is designed from the ground up to perform to the highest level of excellence. Drop-in replacement 1:10 right hand twist black nitride finish the victory first barrel for glock 17 is purpose built to provide confidence for the shooter by eliminating concern over accuracy a mfg: victory first. High quality handgun barrels by Victory First. Manufacturer item ID: VBG17GEN3BT.
More Details : click here
SEARCH this site : click here
|
|
|
Storm Lake Barrels For Glock 9mm 4.49"(11.4cm) For Glock 17 Black Technical Info
USD 170.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that's great for cast bullets. May require minor fitting. All barrels are chambered for full case support mfg: storm lake specs: 416 stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 barrels available with black isonite qpq finish. High quality handgun barrels by Storm Lake. Manufacturer item ID: 34001.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Smith & Wesson M&P 2.0 Compact 9mm Luger Flame Fluted Barrel S&W M&P 2.0 Compact Nitride 9mm Luger Non Threaded Barrel Technical Info
USD 185.25
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Upgrading the accuracy of your m&p m2.0 compact with faxon's new 9mm luger flame fluted barrels. Made from 416-r stainless steel, the flame fluted barrels are conventionally rifled with a 1:10 twist barrel. The faxon m2.0 compact barrel is also coated in a salt bath nitride finish that has great wear resistance properties inside and out. Faxon finishes each barrel with their distinctive flame fluting to give the barrel a custom touch. Flame fluted barrel caliber: 9mm luger 11-degree target crown 416-r stainless steel construction black finish in addition to the conventional rifling and the match grade 416-r steel, faxon also cuts an 11- mfg: faxon firearms. High quality handgun barrels by Faxon. Manufacturer item ID: MPB910NC2LOQN.
More Details : click here
SEARCH this site : click here
|
|
|
Bar Sto Precision Machine Sig Sauer 320 Semi Fit 9mm Conversion Barrel Technical Info
USD 237.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The bar-sto semi-fit 9mm conversion barrel for the sig sauer 320 brings renowned quality to your shooting platform and allows for the conversion of your 40 s&w to a 9mm. The u.S. Marine corps marksman unit has trusted bar-sto barrels since 1977, so these barrels have earned the industry-leading reputation. Bar-sto semi-fit barrels are machined, bored, and rifled in bar-sto's own facility. 1:16" twist machined from solid 416 stainless steel bar stock for use with the sig sauer 320 only bar-sto semi-fit barrels may drop right in your sig 320, but users should expect some fitting. Mfg: bar-sto precision machine. High quality handgun barrels by Bar-Sto. Manufacturer item ID: 100-024-936.
More Details : click here
SEARCH this site : click here
|
|
|
Nowlin 9mm Stainless Steel 1911 Pre Fit Match Grade Barrel 5" Ramped 9mm Ramped 5" Technical Info
USD 242.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The easiest way to install the superb performance of nowlin's ecm match-grade barrels in your 1911 auto. Barrel kit comes complete with a pre-fitted, stainless steel bushing, barrel link and pin with little-to-no fitting required for installation. Barrels feature pre-fitted hood, top lugs and bottom feet that give a very close fit for increased accuracy in most 1911 autos. Includes factory-standard link and hardened, oversize pin. Mfg: nowlin. High quality handgun barrels by Nowlin. Manufacturer item ID: R5PF9.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Threaded Mid Line Barrel G19 Stainless Steel Technical Info
USD 210
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The agency arms threaded mid line barrel adds a number of capabilities to any glock g19 pistol, including providing sound-suppression capabilities using a number of silencers. The agency arms threaded mid line barrel incorporates 416r stainless into its construction, providing users with heightened resistance to both corrosion and excess wear. Barrel rifled using a broach features twist rate of 1:10 includes 1/2x28 tpi threaded muzzle stainless steel finish the agency arms threaded mid line barrel also has a number of attractive features, including gear flutes along the outside of the barrel, as well as a plain steel finish. Mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: T2G19SS.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .40 S&W Fits W/N Technical Info
USD 241.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. High quality handgun barrels by Kart. Manufacturer item ID: 472-002-040.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc Semi Drop In Threaded Barrel For S&W M&P 4.25" Technical Info
USD 259.95
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The apex grade semi drop-in threaded barrel for the smith & wesson m&p is available in either a 5.00" or 4.25" option. The stainless steel barrel features a 1:10" twist rate. The design increases accuracy performance making the m&p capable of shooting as small as a 1-1/2 inch grouping at 25 yards. Accuracy test results based on using a mechanical rest. Final results may vary based on shooter ability, ammunition selection and variations in factory firearm tolerances. Barrel is threaded for β½-28", and includes a thread protector. Works with all smith & wesson 9mm m&p pistols requiring a 5.00" or 4.25" barrel. Mfg: apex tactical specialties inc. High quality handgun barrels by Apex. Manufacturer item ID: 105061.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Standard Line Barrel G19 Titanium Nitride Technical Info
USD 160
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The agency arms non-threaded standard line barrel allows owners of the glock g19 to improve the quality of their barrel with a number of highlighted upgrades. The agency arms non-threaded standard line barrel uses 416r stainless steel in its construction, providing users with a number of anti-corrosive and anti-wear capabilities. Pulled-broach rifling optimized 1:10 rate of twist total barrel length of 4.02 inches titanium nitride finish the agency arms non-threaded standard line barrel also features a sleek finish, incorporating subtle machining marks for caliber designations and company of origin. Mfg: agency arms llc. High quality handgun barrels by Agency. Manufacturer item ID: NT1G19TN.
More Details : click here
SEARCH this site : click here
|
|
|
Victory Barrel For Glock 43 Black Non Threaded Technical Info
USD 169.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The victory first barrel for glock 43 delivers match grade performance to a sub-compact platform. Short barrels, by definition, are more difficult to shoot accurately; get ahead of the game with a barrel manufactured to produce the highest levels of accuracy and consistency. The victory first barrel for glock 43 is precision machined from 416r and nitride finished for premium strength and durability. It features a laser engraving of the badge and logo of international firearms trainer, matt jacques, who designed the barrel from the ground up. Drop-in replacement 1:10 right hand twist black nitride finish the victory first barrel for glock 43 takes the sub-co mfg: victory first. High quality handgun barrels by Victory First. Manufacturer item ID: VBG43GEN3BN.
More Details : click here
SEARCH this site : click here
|
|
|
Storm Lake S&W M&P Threaded Barrels M&P 45acp Th Bbl Isonite Technical Info
USD 195.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Features: machined 416 stainless steel smith & wesson m&p barrels black isonite qpq finish held to tolerances of .001" cut-broach rifling 1-16 twist include thread protector rc 40-42 may require minor fitting available for full size 9mm, 40s&w and 45acp m&ps 9mm barrel available with β½-28 or β½-32 threading (for suppressor without o-ring) 40 s&w barrel gas 9/16-24 threading (for suppressor without o-ring) 45acp barrel has .578"-28 threading (for suppressor without o-ring) benefits: cut-broach rifling allows for cast bullets, as well as jacket bullets to be u mfg: storm lake specs: 416 stainless steel, black isonite qpq finish. Length 9mm & 40s&w: 4.95". 45acp: 5.30". High quality handgun barrels by Storm Lake. Manufacturer item ID: 34124.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 9mm Suppressor Ready Threaded Barrels 1911 9mm 5" Government Threaded Barrel Technical Info
USD 249.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Identical to the standard drop-in ed brown barrel, but longer length and threaded for use with suppressors. Thread size is 1/2" x 28 tpi rh. Includes link, link pin, bushing and thread protector. Barrel accuracy comes from using the highest quality materials and manufacturing methods. Ed brown products is committed to both. The barrels are made from t-416 modified, gun barrel quality stainless steel bar stock, just like a benchrest rifle barrel. T-416 is certified pure, there are no foreign materials, and no hard or soft spots to worry about. It is stress-relieved and heat-treated prior to final rifling and refinishing. Ed brown barrels are precision machine cut from mfg: ed brown. High quality handgun barrels by Ed Brown. Manufacturer item ID: 9259MMSR.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 19 Ls Barrel For Gen3 Glock 19 9mm Technical Info
USD 169.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Build your own custom glock style pistol with the brownells extended 9mm barrel for glock 19 frames. Taking the length of a standard glock 17 barrel & slide, brownells has adapted a longer slide to function on a compact glock 19 size frame. This barrel is required for use with these slides for optimum performance and parts compatibility. Get the benefits of a long slide & short frame all in one package. Excellent build choice for those carrying concealed, where slide length isn't a concern, but grip printing is. Long slide & barrel allows user to maximize their sight radius, leading to improved shot placement.   mfg: brownells. High quality handgun barrels by Brownells. Manufacturer item ID: BRN19LS.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Handgun Barrels Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
