Gunsmith Files Technical Info
|
|
|
 Apex Tool Group Mill Files Second Cut 8" (20.3cm) Technical Info
USD 13.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. High quality gunsmith files by Apex. Manufacturer item ID: 8529.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Slot Files Screw Equalling File #4 .025 Technical Info
USD 47.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Making screw slots is a delicate operation and only the finest, most precise files will do. These are the ones! six sizes and two styles let you cut even the super-thin european slots. Doing the job right takes both a joint file that cuts only on the edges and won't widen the slot as it deepens, and an equalling file to clean up the slot sides and square the bottom. Available in matched, same-size pairs, 1 joint and 1 equalling. Plus, there's the master screw slot set with all twelve files to cover any slotting job. Individual files also available. Note: these files are very thin and easily bent or broken. Sorry, cannot guarantee. Mfg: friedr. Dick gmbh specs: 5-5/8" (14.3cm) long. Both joint and equalling files of the same no. Are the same thickness. Shipping weight 1/4 lb. High quality gunsmith files by Freed. Manufacturer item ID: 11180630.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells File Chalk 12 Pieces Technical Info
USD 13.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Filling file teeth with this chalk is an age old "gunsmith kink"® to prevent "pinning", the buildup of metal chips in the teeth of the file. It increases the effectiveness of the file, extends file life, and produces a smoother, more professional finish. Metal removal is faster and easier, too. An inexpensive time and money saver. For superior results, use file chalk along with a good file card, listed elsewhere. Mfg: brownells specs: 4" (10.2cm) long, 1" (2.5cm) diameter 2 pieces per tube. High quality gunsmith files by Brownells. Manufacturer item ID: 080-705-012.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Metal Checkering Files 50 Lpi (#2) Technical Info
USD 53.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). High quality gunsmith files by Brownells. Manufacturer item ID: 31043.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #1 Three Square Technical Info
USD 13.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. High quality gunsmith files by Freed. Manufacturer item ID: 21321410.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Metal Checkering Files 30 Lpi (#0) Technical Info
USD 49.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). High quality gunsmith files by Brownells. Manufacturer item ID: 31041.
More Details : click here
SEARCH this site : click here
|
|
|
Eze Lap Diamond Needle Files Eze Lap 600 Set Fine Technical Info
USD 38.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Incredibly hard, industrial diamond, powder impregnated surface requires very little travel to quickly cut even the hardest materials, carbide, steel, glass or ceramics. Mfg: eze-lap diamond specs: available in either coarse or fine grit. Files are 5.5" (14cm) long. Carbon steel shanks are .118" (3mm) dia. High quality gunsmith files by Eze-Lap. Manufacturer item ID: 600F.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #1 1 Square Technical Info
USD 13.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. High quality gunsmith files by Freed. Manufacturer item ID: 21421410.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #2 Cut Technical Info
USD 38.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. High quality gunsmith files by Apex. Manufacturer item ID: 35073.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Round Files 1/8" Round File Technical Info
USD 7.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. High quality gunsmith files by Apex. Manufacturer item ID: 191-000-003.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells File Chalk 6 Pieces Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Filling file teeth with this chalk is an age old "gunsmith kink"® to prevent "pinning", the buildup of metal chips in the teeth of the file. It increases the effectiveness of the file, extends file life, and produces a smoother, more professional finish. Metal removal is faster and easier, too. An inexpensive time and money saver. For superior results, use file chalk along with a good file card, listed elsewhere. Mfg: brownells specs: 4" (10.2cm) long, 1" (2.5cm) diameter 2 pieces per tube. High quality gunsmith files by Brownells. Manufacturer item ID: 333.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #1 Cut Technical Info
USD 42.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. High quality gunsmith files by Apex. Manufacturer item ID: 31029.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #3 Knife Technical Info
USD 11.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. High quality gunsmith files by Freed. Manufacturer item ID: 21721430.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group American Pattern Hand Files Smooth Cut 8" Technical Info
USD 16.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: One of the basic gun work files and an excellent, all purpose file for dressing, striking off, shaping and metal removing of all types. Parallel in width, taper slightly in thickness. Double-cut sides; one edge is single-cut, other is safe. Mfg: apex tool group specs: 8" (20.3cm) american, 25/32" (19.8mm) wide x 7/32" (5.6mm) thick. 10" (25.4cm) american, 31/32" (24.6mm) wide x βό" (6.3mm) thick. High quality gunsmith files by Apex. Manufacturer item ID: 5919.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #3 Half Round Technical Info
USD 11.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. High quality gunsmith files by Freed. Manufacturer item ID: 21521430.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Three Square 60Β° Bent Needle Files Fine File Technical Info
USD 25.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: For pointing up new checkering and cleaning out old. The only thing to use for getting true, sharp diamonds. Available in three cuts: coarse, for cleaning out old, dirty checkering; medium, for pointing up new diamonds; and fine, also for pointing up new diamonds. Advise cut desired when ordering. Mfg: brownells specs: 6βό" (15.9cm) overall length. High quality gunsmith files by Brownells. Manufacturer item ID: SP342E.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "v" Shaped 90Β° Bent Needle Files Fine File Technical Info
USD 21.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Made for us on special order for gun checkering. Cutting edge of the "v" is 90, thus eliminating tipping the tool from one side to the other to point-up 90 diamonds. Assures good, positive work. Uniform contact and shape. Back of file is "safe." mfg: brownells specs: 6βό" (15.9cm) overall length. Medium or fine cut. High quality gunsmith files by Brownells. Manufacturer item ID: SP342B.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Metal Checkering Files 40 Lpi (#1) Technical Info
USD 51.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). High quality gunsmith files by Brownells. Manufacturer item ID: 31042.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Head Files Set Technical Info
USD 122.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: High-quality, steel files designed for one purpose only x"x to cut perfectly square screw slots every time. #7, #9, and #11 files cover the most common slot sizes. Smooth-sided to cut only on the edge. Will not widen the slot as it deepens, or damage the screw head. Cleans up marred slots on hard to replace screws or cuts slots in new screws. Use with needle file handles. These files are very thin for precise cutting. Sorry, cannot guarantee against bending or breakage. Sold individually or as a set. Mfg: friedr. Dick gmbh specs: 5βύ" (14.6cm) overall length. Shank is 1β½" (3.8cm) long. Thickness: #7, .027" (.69mm), #9, .035" (.89mm), #11, .043" (1.1mm). Set includes one each, #7, #9, #11 files. High quality gunsmith files by Freed. Manufacturer item ID: SCREWHEADFILE.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Mill Files Smooth Cut 10" (25.4cm) Technical Info
USD 16.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. High quality gunsmith files by Apex. Manufacturer item ID: 8704.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Files Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
