Sinclair International Bronze Bore Brush (Rifle) /338 Cal Technical Info
Gun Cleaning Bore Brushes by Sinclair
|
Item technical details & specifications: Sinclair bronze bore brushes are manufactured significantly larger than bore diameter to fit your barrel properly and have a closed loop on the end. Many other brushes are undersized and don't do an adequate job of scrubbing the barrel. Mfg: sinclair international. High quality gun cleaning bore brushes by Sinclair. Manufacturer item ID: B338.
 Indicative Price: USD 3.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Dewey Copper Eliminator Bore Brushes .25/6.5/.270/7mm 8 32 Male Thread 3 Pak Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Cleaning brushes have machined aluminum components that don't react with ammonia-based solvents like brass parts sometimes do. Won't produce blue-green stains on your patches that can be misinterpreted as "false positive" indications of copper fouling, so you'll know when your bore really is copper-free. Similar in hardness to brass, copper eliminator parts won't scratch the bore or damage the muzzle, and they'll stand up to hard use. Nylon bristles wound around an aluminum core and male-threaded aluminum coupling are completely brass-free to eliminate false-positive blue-green indications of copper fouling that can occur when using ammonia-based sol mfg: dewey specs: nylon bristles, aluminum core and ferrule. Thread patterns indicated in table. Sold in 3- and 12-paks. High quality gun cleaning bore brushes by Dewey. Manufacturer item ID: B25NA3PACK.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Double Tuff Bore Brush Fits .270 Rifle Pak 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-144-270.
More Details : click here
SEARCH this site : click here
|
|
|
Dewey Copper Eliminator Bore Brushes .22/.223/.224 Cal. 8 32 Male Thread 12 Pak Technical Info
USD 23.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Cleaning brushes have machined aluminum components that don't react with ammonia-based solvents like brass parts sometimes do. Won't produce blue-green stains on your patches that can be misinterpreted as "false positive" indications of copper fouling, so you'll know when your bore really is copper-free. Similar in hardness to brass, copper eliminator parts won't scratch the bore or damage the muzzle, and they'll stand up to hard use. Nylon bristles wound around an aluminum core and male-threaded aluminum coupling are completely brass-free to eliminate false-positive blue-green indications of copper fouling that can occur when using ammonia-based sol mfg: dewey specs: nylon bristles, aluminum core and ferrule. Thread patterns indicated in table. Sold in 3- and 12-paks. High quality gun cleaning bore brushes by Dewey. Manufacturer item ID: B22NA.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 3 .30 Rifle Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-420-029.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Heavy Weight Nylon Bore Brush 28 Ga 3 Pak Technical Info
USD 8.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Super-aggressive, nylon brush makes short work of stubborn bore deposits. Extra-stiff, large diameter bristles are safe on rifling and smoothbore surfaces. Won't deteriorate when used with your favorite solvent. Strong, one-piece, looped and wound brass shank and coupling prevents scratching. Mfg: brownells specs: bristles: heavy weight (hw) nylon. Shank: brass, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-444-026.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Dewey Thread Bore Brush Fits .243/.25 Rifle Dozen Technical Info
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Do away with the thread adapter; special line brushes thread right onto dewey coated rods. Eliminates the need to constantly change adapters; no more hunting for a misplaced adapter. Special line brushes have the best phosphor bronze wire bristles for long life and thorough cleaning. A one-piece, looped and wound, brass shank and coupler prevents any chance of putting a scratch in that all-important barrel. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3β½ (8.5cm) oal. Pistol: 2-3⁄8 (6cm) oal. Calibers .22 to 6.5mm have 8-36 female threads. Calibers .270 to .50bmg have 12-28 female threads. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-418-025.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Bronze Bore Brushes 1 Dozen .44/.45 Rifle Technical Info
USD 15.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze bore brushes, best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: brownells specs: bristles: available in bronze. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-401-045.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .40 Smith & Wesson/.41/10mm Pistol Per 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-140.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Heavy Weight Nylon Bore Brush .416 Rifle 3 Pak Technical Info
USD 9.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Super-aggressive, nylon brush makes short work of stubborn bore deposits. Extra-stiff, large diameter bristles are safe on rifling and smoothbore surfaces. Won't deteriorate when used with your favorite solvent. Strong, one-piece, looped and wound brass shank and coupling prevents scratching. Mfg: brownells specs: bristles: heavy weight (hw) nylon. Shank: brass, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-444-009.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .22 Pistol Per 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-121.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 1 Dozen .35/.38 Special/.357 Rifle Technical Info
USD 19.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-420-035.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .30 Rifle Per 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-029.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Sinclair International Bronze Bore Brush (Rifle) /338 Cal Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
