Gunsmith Polishing Wheels Technical Info
|
|
|
 Brownells Muslin Wheels 10" Stitched Muslin Wheel 1" Arbor Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 174.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 8" Medium Felt Polishing Wheel 1" Arbor Technical Info
USD 49.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: WA080100E2.
More Details : click here
SEARCH this site : click here
|
|
|
Norton Polishing Wheel Cleaning Brick Technical Info
USD 12.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Porous, rough, crystolon block quickly knocks off all the old caked-on, used-up abrasive and metal residue from the surface of muslin and felt wheels. Gets the wheels ready to accept a full load of fresh polish. Also shapes and dresses grinding wheels. Mfg: norton specs: 2" (5cm) high x 2" (5cm) wide x 4" (10.1cm) long. High quality gunsmith polishing wheels by Norton. Manufacturer item ID: 61463687810.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 8" Hard Felt Polishing Wheel 3/4" Arbor Technical Info
USD 104.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 088-281-750.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Sisal Wheels 8" Sisal Wheel 3/4" (19.0mm) Arbor Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: 7 plys of prime woven jute with an outer muslin cover on each side provide a very aggressive surface for fast removal of rough metal, rust and similar jobs with coarser polishing grits. Finer grits produce an attractive "brushed" finish. Spiral stitched, long-lasting construction. Mfg: brownells specs: 6" (15.2cm) or 8" (20.3cm) diameter, both 3/8" (9.5mm) wide. 7 ply. 6" wheel, β½" arbor only. High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 250.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Muslin Wheels 6" Stitched Muslin Wheel 1/2" Arbor Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 5.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 6" Hard Felt Polishing Wheel 1" Arbor Technical Info
USD 51.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 900683N.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Muslin Wheels 8" Stitched Muslin Wheel 1" Arbor Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 171.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Muslin Wheels 8" Stitched Muslin Wheel 5/8" Arbor Technical Info
USD 12.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 101447AH.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 8" Hard Felt Polishing Wheel 5/8" Arbor Technical Info
USD 104.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 088-281-625.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Muslin Wheels 6" Stitched Muslin Wheel 5/8" Arbor Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 66.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Sisal Wheels 8" Sisal Wheel 5/8" (15.9mm) Arbor Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: 7 plys of prime woven jute with an outer muslin cover on each side provide a very aggressive surface for fast removal of rough metal, rust and similar jobs with coarser polishing grits. Finer grits produce an attractive "brushed" finish. Spiral stitched, long-lasting construction. Mfg: brownells specs: 6" (15.2cm) or 8" (20.3cm) diameter, both 3/8" (9.5mm) wide. 7 ply. 6" wheel, β½" arbor only. High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 101321AH.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Muslin Wheels 8" Stitched Muslin Wheel 7/8" Arbor Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 168.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 6" Medium Felt Polishing Wheel 1" Arbor Technical Info
USD 54.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 900682N.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 6" Medium Felt Polishing Wheel 5/8" Arbor Technical Info
USD 57.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 088-161-625.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 8" Medium Felt Polishing Wheel 5/8" Arbor Technical Info
USD 85.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 088-181-625.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 6" Hard Felt Polishing Wheel 5/8" Arbor Technical Info
USD 52.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: 088-261-625.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Muslin Wheels 10" Stitched Muslin Wheel 7/8" Arbor Technical Info
USD 11.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Spiral stitched, used primarily for first cleaning operation on the gun with no. 140 polish-o-ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of soft felt wheels, being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose muslin, used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note:, use enough sections to make each wheel as wide as your polishing motor will handle, a minimum of three sections to each wheel. Never mfg: brownells specs:stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm). High quality gunsmith polishing wheels by Brownells. Manufacturer item ID: 26.
More Details : click here
SEARCH this site : click here
|
|
|
Bacon Felt Company Felt Polishing Wheels 8" Hard Felt Polishing Wheel 1" Arbor Technical Info
USD 54.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Finest quality 1" wide felt wheels, carefully selected and factory trued. (final touch-up truing may be required.) only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on polish-o-ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1/2 hp or under, use 6" wheels at 3600 rpm, 1/2 hp or over, 8" at 1800, 3/4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium or hard wheel for 555™ polish. Mfg: bacon felt company specs: all are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1/2" (12.7mm), 5/8" (15.9mm), 3/4" (6.4mm) and 7/8" (22.2mm). One adapter supplied with each wheel. High quality gunsmith polishing wheels by Bacon Felt. Manufacturer item ID: WA080100G2.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Polishing Wheels Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
