Gunsmith Handgun Takedown Tools Technical Info
|
|
|
 Brownells/Samson Mfg.Corp. S&W K/L/N Frame Spd Tool S&W Revolver Spd Tool Technical Info
USD 49.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Pocket tool helps you perform most of the tasks required to maintain a smith & wesson k, l, or n frame revolver. Great for quick repairs and adjustments in the field or at the range. Includes screwdriver bits for the grip screws and strain screws, plus the screws for the side plate, yoke, cylinder thumb piece latch nut, and adjustable rear sight. Use it to remove/install the rebound slide and rebound slide spring, as well as to tighten/loosen the extractor rod without damaging the knurling on the tip of the rod. Strong internal magnets retain the driver bits and help keep small steel parts from rolling away during field or bench disassembly. Driver bits are hollow ground to ensure full-s mfg: brownells/samson mfg.Corp. Specs: 6061 t6 aluminum body, hardcoat anodized, matte black, with hardened steel 210-2 and 150-3 bits. 3ß?" (8.2cm) long, βύ" (1.9cm) wide, β½" (1.3cm) thick. 2 oz. (57g) wt. For smith & wesson k, l, and n frame revolvers. High quality gunsmith handgun takedown tools by Samson. Manufacturer item ID: 080-000-820.
More Details : click here
SEARCH this site : click here
|
|
|
Lone Wolf Dist. Ultimate Armorer's Tool For Glock Ultimate Armorer's Tool Technical Info
USD 21.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Multi-function tool lets you do a complete disassembly, change sights, replace parts, even give your favorite glock a quick brushing off. Features a 3/32" pin punch, 3/16" flat blade for connector removal, 3/16" sight nut driver and a cleanup brush. Pocket clip for handy carry. Mfg: lone wolf dist. Specs: brass body and flat blade. 4ß?" long. Stainless steel pin punch. High quality gunsmith handgun takedown tools by Lone Wolf. Manufacturer item ID: LWDAT1.
More Details : click here
SEARCH this site : click here
|
|
|
The All In One Tool Ruger All In One Tool Technical Info
USD 28.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The ruger mark series .22 pistols have renowned popularity, until cleaning time. We have all heard and read the stories about how frustrating disassembling and reassembling can be. Too many of us have just avoided it. No more! now, with the user friendly, all-in-one tool, there is a simpler, safer, and faster, method to clean our guns. The tool works on all the mark series i, ii, iii, and 22/45 pistols with a square recess in the mainspring housing. And without altering the gun. For new guns or excessively dirty guns, we recommend the accessory stand. The stand frees up your second hand, allowing for more pressure to be placed on the durable tool which even mfg: the right tool co. High quality gunsmith handgun takedown tools by Right Tool. Manufacturer item ID: TOOL.
More Details : click here
SEARCH this site : click here
|
|
|
Gunsmither Tools Ruger Mk I/Mk Ii Takedown Tool Technical Info
USD 16.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Sort of like a swiss army knife, this small, self-contained, takedown tool has everything you need for field stripping your ruger. Delrin, tool body features an aluminum end cap with steel, wire loop for removing the mainspring housing latch. Punch on opposite end drives out the bolt stop pin without marring the metal. Unscrew end cap to expose the extractor removal pin. Use pin to remove the extractor, plunger and spring for cleaning or replacement. A must have for the mark i /mark ii owner. Mfg: gunsmither tools specs: body/punch, delrin, black. Extractor tool, aluminum/steel. 3-7/8" (cm) oal, β½" (1.3cm) diameter. High quality gunsmith handgun takedown tools by Gunsmither. Manufacturer item ID: 100-001-507.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Replaceable Pin Punch Kit Glock Technical Info
USD 9.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The brownells replaceable pin punch kit for glocks lets you completely disassemble any glock pistol. Punch out the locking block pin, trigger housing pin, and trigger pin. Also depresses the magazine floorplate catch for removal of the plate for cleaning or replacement of the spring and follower. Mfg: brownells. High quality gunsmith handgun takedown tools by Brownells. Manufacturer item ID: 080-001-121.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Sa Revolver Double End Base Pin Puller Technical Info
USD 42.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Robust tool gives you enough length and leverage to remove even the most stubborn pins without marring the frame. Double-ended tool precisely fits ruger revolvers on one end and colts on the other, so base pins on the most popular cowboy guns can be pulled with one convenient tool. Mfg: brownells specs: steel, black. 5" (12.5cm) long. Fits ruger and colt revolver base pins. High quality gunsmith handgun takedown tools by Brownells. Manufacturer item ID: 080-000-367.
More Details : click here
SEARCH this site : click here
|
|
|
Majestic Arms Ltd. Ruger Mark I/Ii/Iii Speed Strip Kit 3.2 Technical Info
USD 78.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Makes field stripping your ruger .22 pistol faster and easier by enabling rapid disassembly with a single allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 conversion kit will fit any ruger .22 auto pistol and allows mk iii owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: majestic arms, ltd. Specs: stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus allen wrench and illustrated installation instructions. Mark i/mark ii fits ruger mark i, ii, and 22/45 pistols. Mark iii fits ruger mark iii pistol. High quality gunsmith handgun takedown tools by Majestic. Manufacturer item ID: 941-000-006.
More Details : click here
SEARCH this site : click here
|
|
|
Glock Disassembly Tool Technical Info
USD 9.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Original glock factory disassembly tool lets you completely disassemble any glock pistol. Assists in removal locking block pin, trigger housing pin, and trigger pin. Depresses magazine floorplate catch for removal of plate for cleaning or replacement of spring and follower. Hardened steel pin shaft with deeply ridged, easy-to-grasp polymer handle. Mfg: glock specs: steel with polymer handle, black. 3ß?" (9.5cm) o.A.L. 1-3/8" (3.5mm) shank length. .100" (2.5mm) shank diameter. High quality gunsmith handgun takedown tools by Glock. Manufacturer item ID: 3374.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells/Samson Mfg.Corp. Sig Sauer Pistol Spd Tool Technical Info
USD 49.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Ultra-compact, pocket tool makes disassembly of sig sauer pistols fast and easy. Use to remove or install grip screws, magazine catch and support plate, pivot pins, sear and decocker springs, and the mainspring assembly on both current-production and older pistols. Also aids in disassembling magazines for cleaning and maintenance. Strong internal magnets retain the replaceable (βό hex drive) screwdriver bit and help keep small parts from rolling away during disassembly. Mfg: brownells/samson mfg.Corp. Specs: body 6061 t6 aluminum, hardcoat anodized, matte black. Driver bit & disassembly pin punch stainless steel. 2ß½" (6.35cm) long, β½" (1.27cm) wide, βύ" (1.9cm) high. 1.6 oz. (45g) weight. For sig sauer p220, p225, p226, p228, p239, and p245 d. High quality gunsmith handgun takedown tools by Samson. Manufacturer item ID: 080-000-721.
More Details : click here
SEARCH this site : click here
|
|
|
K And C Barrels Sig Sauer P250 Assembly & Disassembly Tool Technical Info
USD 25.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Compact, two-in-one specialty tool removes the firing pin spring pin, plus the hammer mainsprings on your p250 pistol. Features an elliptical tip for pushing on the firing pin spring pin without flattening the head, plus a concave tip for the safe, controlled removal of the hammer double mainsprings. Precision machined from steel bar stock, then hardened to rc 52 for added strength. Small enough to fit in your pocket, range bag, or armorer's kit. Mfg: k and c barrels specs: steel, rc 52 hardness. 3ß½" (9.5cm) long x 5⁄16" (8mm) diameter handle. High quality gunsmith handgun takedown tools by K&C. Manufacturer item ID: P250.
More Details : click here
SEARCH this site : click here
|
|
|
Majestic Arms Ltd. Ruger Mark I/Ii/Iii Speed Strip Kit Mark I/Ii Speed Strip Kit Technical Info
USD 55.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Makes field stripping your ruger .22 pistol faster and easier by enabling rapid disassembly with a single allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 conversion kit will fit any ruger .22 auto pistol and allows mk iii owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: majestic arms, ltd. Specs: stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus allen wrench and illustrated installation instructions. Mark i/mark ii fits ruger mark i, ii, and 22/45 pistols. Mark iii fits ruger mark iii pistol. High quality gunsmith handgun takedown tools by Majestic. Manufacturer item ID: 941-000-003.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Glock Magazine Release Tool Technical Info
USD 27.5
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Now you can keep that magazine well pristine and working like a combat pistol should with our gmrt-01 tool. Its specially formed tip is shaped to release the magazine release spring with maximum bite and leverage. You'll notice the rounded tip is also highly polished stainless steel, that can't damage the mag well or mag release…ever. The ergonomic handle is also stainless steel for long, corrosion-free service. Also works on any pistol with glock-style magazine release, such as smith & wesson m&p, etc. The ultimate glock tool for gunsmiths, armorers & shooters that have multiple mag release installations in one sitting or for detailed regular mainte mfg: tangodown. High quality gunsmith handgun takedown tools by Tangodown. Manufacturer item ID: GMRT01.
More Details : click here
SEARCH this site : click here
|
|
|
10 8 Performance Armorer Tool Black Technical Info
USD 10.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Handy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and pushing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is useful for depressing springs and spring-loaded parts-even use to thread molle straps through webbing-while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, glock, or smith & wesson m&p or when working on service rifles like the ar-15/m16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working wi mfg: 10-8 performance llc specs: glass reinforced nylon, black or flat dark earth, approximately 5" (12.7cm) long, βό" (6.4mm) diameter. High quality gunsmith handgun takedown tools by 10-8 Performance. Manufacturer item ID: TOOLB.
More Details : click here
SEARCH this site : click here
|
|
|
Code 9 Evolutions The Glock Operator's Tool G.O.T. Glock Operator's Tool Technical Info
USD 19.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: Looking to save weight on your ar-15? if you've shaved ounces off by choosing the brigand arms carbon-fiber handguard, then the brigand arms m-lok aluminum backing plate is the accessory you need to attach lights, lasers, grips and other add-ons without bulking up your already-trim handguard. This backing plate enables users to attach all the accessories of their choice without adding heavy picatinny-rail segments that cancel out all the weight-saving benefits of the carbon-fiber handguard. Each plate weighs just 0.26 ounce, and the screws and hex wrench needed for installation are included. Mfg: code 9 evolutions. High quality gunsmith handgun takedown tools by Code. Manufacturer item ID: GOT22201.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Disassembly Tool For Glock Technical Info
USD 10.99
(Indicative price - actual current price possibly lower)
Item technical details & specifications: The brownells disassembly tool for glock pistols makes taking apart any glock pistol a piece of cake! no more struggling with small, cheap punches that are just barely large enough to get the job done (with a few four-letter words uttered by the user along the way). Our brownells disassembly tool for glock pistols has a comfortable, easy-to-grasp handle, a real, screwdriver-style handle, that fits even the largest paws! deep flutes on the shockproof, polymer handle provide a secure, non-slip gripping surface. You maintain better control of the tool, reducing the risk of slipping and damaging your pistol's slide finish or polymer frame. Heavy-duty, 2-3/4" lon mfg: brownells. High quality gunsmith handgun takedown tools by Brownells. Manufacturer item ID: 080-001-365.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Handgun Takedown Tools Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
