Burris Ar Pepr Permanent Mounts 30mm Ar Pepr Mount Technical Info
Gun Optics Mount Sets by Burris
|
Item technical details & specifications: One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (nvd), add-on magnifier, or long eye relief scope. The "proper eye position ready" mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six torx screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Mfg: burris specs: aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to mil-std 1913 picatinny rails. High quality gun optics mount sets by Burris. Manufacturer item ID: 410341.
 Indicative Price: USD 89.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Bkl Technologies 200 Seroes 1" Scope Rings 1" Dovetail Rings Black Technical Info
USD 18.95
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: Aircraft-grade aluminum scope rings feature self-adjusting clamping legs that fit 3⁄8" or european 11mm dovetail mounts found on many bolt-action rimfire rifles. Each leg moves equally as the clamping screws are tightened to keep the scope centered on the rail. Clamping screws also fit into pre-drilled holes to equally spread the legs to easily slip over oversized rails. 200 series fits 1" scopes and 300 series fits 30mm scopes. Available as a one-piece cantilever mount with a 2.4" offset, a pair of scope rings, or as a pair of one standard and one offset ring with a 1.3" offset. Ring pairs available as either single, or double top strap. Single-strap rings measure mfg: bkl technologies. High quality gun optics mount sets by BKL. Manufacturer item ID: BKL257MB.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance K5 Mount For 5000 Series Kestrel Weather Meters Technical Info
USD 58.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: Badger ordnance's k5 mount for kestrel weather meters clamps to your spotting scope, so you can easily read weather data from behind the scope without changing positions. The k5 mount attaches firmly to picatinny rails at the 3 or 9 o'clock position on your scope (rails not included). Pop the kestrel into the mount, and it is held securely so it will not fall out. K5 accepts 5000 series kestrel weather meters only made of light, tough, durable reinforced 2200-series polyamide coyote tan color the badger ordnance k5 mount for kestrel weather meters clamps to the scope's picatinny rail via a simple setscrew; a knurled head makes the screw eas mfg: badger ordnance. High quality gun optics mount sets by Badger. Manufacturer item ID: 51920.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Savage With Accutrigger 1" Low Scope Mount Technical Info
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. High quality gun optics mount sets by Talley. Manufacturer item ID: 930725.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Integral Mounting System 1 Ring Insert Matte Technical Info
USD 93.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: Designed for the precision ar-15 shooter, leupold's ims optic mounts clamp directly to a mil-std 1913 picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. Aluminum, hardcoat anodized finish, matte black. The versatile mark 4 integral mounting system gives you maximum adaptability with modular components, each sold separately. The mark 4 base clamps securely to the rifle's flattop rail with a pair of hex head crossbolts and accepts the 1" or 30mm scope ring insert. The ring insert unit contains both scope rings mfg: leupold specs: aluminum, hardcoat anodized, matte black. Steel crossbolts. 5ß?" (14.6cm) long. High quality gun optics mount sets by Leupold. Manufacturer item ID: 110294.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Browning A Bolt Low 1" Scope Mounts Technical Info
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. High quality gun optics mount sets by Talley. Manufacturer item ID: 930000.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 0 Moa Type SP4008 Technical Info
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. High quality gun optics mount sets by Spuhr. Manufacturer item ID: SP4008.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 La Medium 30mm Scope Mounts 20 Moa Technical Info
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. High quality gun optics mount sets by Talley. Manufacturer item ID: 740700LM.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Micro T1 45 Degree Mount Technical Info
USD 134.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: Go from a primary, magnified optic to red dot action- with just a twist of your rifle- using the zrodelta dloc- micro 45 degree mount. Heavy duty springs in the side bar clamp down the instant you drop the mount on the rail, making installation hassle-free! sporting three recoil lugs, with six engagement points, the dloc system bites down on the rail like a snapping turtle, and it won't shake loose under heavy recoil or abuse in the field. Retention knob lets you hand tightening the mount to rail without worrying about stability. Fits the trijicon micro slim enough to fit under most magnified optics mount's extreme grip allows user to just hand mfg: zro delta. High quality gun optics mount sets by ZRO Delta. Manufacturer item ID: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Quick Detach Isms Qdp Mount 34mm 1.5" 0 Moa Quick Detach Isms Technical Info
USD 495
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: The spuhr qdp mount is an extremely sturdy one-piece scope mount that clamps directly to any mil-std 1913 picatinny receiver rail or base. It combines the rock-solid stability of spuhr's proven ideal scope mounting system (isms) with easy-to-operate quick-release levers that let you attach and remove the spuhr qdp mount from your rifle with the mount and the scope as a single unit. The spuhr qdp mount has 45-degree split rings designed so the bulkiest part of the rings is not in your line of sight of the scope turrets. Another innovation is a bubble level built into the base to help you make sure the rifle is perfectly level, helping you control another important variable in lo mfg: spuhr. High quality gun optics mount sets by Spuhr. Manufacturer item ID: QDP4002.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Kimber Model 84 Current Production Low 30mm Scope Mounts Technical Info
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. High quality gun optics mount sets by Talley. Manufacturer item ID: 738749.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Ruger 10/22 1" Low Scope Mount Technical Info
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. High quality gun optics mount sets by Talley. Manufacturer item ID: 930707.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon Black 30mm Cantilever Scope Mount 0 Moa Technical Info
USD 109.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: Nikon's black 30mm cantilever scope mount gives you a solid mounting option for your scope, ensuring it stays zeroed and ready for use at all times. Each nikon black 30mm cantilever scope mount is precision-machined from high-grade aluminum alloy to provide a one-piece mounting platform that ensures a solid fit. The rail clamp is secured by 1/2" hex-nuts that will withstand 65 in.-lb. Of torquing force, a scope anchored by the black mount isn't going anywhere! easy-on/easy-off design: remove scope & mount as one unit, reinstall without loss of zero non-reflective matte black finish clamps to any mil-std 1913 picatinny receiver rail the mfg: nikon. High quality gun optics mount sets by Nikon. Manufacturer item ID: 16403.
More Details : click here
SEARCH this site : click here
|
|
|
American Defense Manufacturing Ad Scout Optics Mount 1 Scout Mount No Offset Technical Info
USD 142.49
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: One-piece integral base and rings designed for traditional optics or similar sights that require two, 30mm rings for additional support. Available in three different lengths for proper eye relief adjustment. Ad-scout-s is standard length for mounting traditional optics. Ad-scout cantilever positions optics farther forward to provide 1" of extra space at the rear for mounting night-vision devices or when additional eye-relief is needed. Ad-scout-x uses the same great cantilever design as the ad-scout cantilever, but position's optics 2" farther forward for maximum room at the rear for mounting night-vision devices or making eye-relief adjustments. Mfg: american defense manufacturing specs: 6061 t6 aluminum, hardcoat t3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body, .87" (2.2cm) high. Distance between rings, 2" (6.3cm.) high. 7.1 ounces (201g) weight. Ad-scout, s, 4" (11.4 cm) oal. Ad-scout cantilever, 6" (15.2cm) oal. Ad-scout -. High quality gun optics mount sets by American Defense. Manufacturer item ID: ADSCOUTS1STD.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce X Treme Duty Ultralite Unimounts 34mm 1.50 0 Moa Unimount Technical Info
USD 252
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets Technical Info
Item technical details & specifications: Just because you have the best possible optic for your precision rifle doesn't mean you're ready for the field. Having a solid set of scope rings is also essential to the accuracy equation, and nightforce x-treme duty ultralite unimount scope rings are built to provide the essential link between your optic and rifle. Each nightforce x-treme duty ultralite unimount is machined from titanium alloy, providing an unprecedented combination of strength and lightness. The rings rise 1.50 inches from the top of the receiver, and sizes are available for both 30mm and 34mm scope tubes. One particular model of the nightforce x-treme duty ultralite unimount is designed specifically mfg: nightforce. High quality gun optics mount sets by Nightforce. Manufacturer item ID: A497.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Burris Ar Pepr Permanent Mounts 30mm Ar Pepr Mount Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
