Brownells Double Tuff Bore Brush Fits .44/.45 Pistol Dozen Technical Info







HOME PAGE PRODUCTS





Brownells Double Tuff Bore Brush Fits .44/.45 Pistol Dozen Technical Info

Brownells Double Tuff Bore Brush Fits .44/.45 Pistol Dozen Technical Info


Gun Cleaning Bore Brushes by Brownells



Item technical details & specifications: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-142-145.

Indicative Price: USD 23.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more high specification gun & shooting products : click here


Try Search on this site - find exactly what you need! Click below:









Visitors interested in this item were also interested in the following:

Sinclair International Dozen Pack Bronze Pistol Brushes 44/45cal Technical Info
Sinclair International Dozen Pack Bronze Pistol Brushes 44/45cal Technical Info


USD 19.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Dozen pack bronze pistol brushes mfg: sinclair international. High quality gun cleaning bore brushes by Sinclair. Manufacturer item ID: BB45P.

More Details : click here

SEARCH this site : click here

Sinclair International Bronze Bore Brush 17 Cal Technical Info
Sinclair International Bronze Bore Brush 17 Cal Technical Info


USD 5.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Sinclair bronze and nylon bore brushes are manufactured significantly larger than bore diameter to fit your barrel properly and have a closed loop on the end. Many other brushes are undersized and don't do an adequate job of scrubbing the barrel. Mfg: sinclair international. High quality gun cleaning bore brushes by Sinclair. Manufacturer item ID: B17P.

More Details : click here

SEARCH this site : click here

Brownells Standard Line Stainless Steel Bore Brushes 1 Dozen S/S .54 Bp Rifle Technical Info
Brownells Standard Line Stainless Steel Bore Brushes 1 Dozen S/S .54 Bp Rifle Technical Info


USD 10.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Stainless steel bore brush, for severely leaded, fouled or rusted bores, the aggressive cleaning action of a stainless steel brush can help get them clean. However, the aggressive action accelerates wear, and regular use can shorten barrel life. .54 bp rifle, 10-32 thread, for use with dewey large-bore coated rods. Mfg: brownells specs: bristles: available in stainless steel. Shank: steel, looped and wound. Rifle: 3 (8.3cm) oal, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-411-055.

More Details : click here

SEARCH this site : click here

Brownells "special Line" Dewey Thread Bore Brush Fits .22 Centerfire 3 Pak Technical Info
Brownells "special Line" Dewey Thread Bore Brush Fits .22 Centerfire 3 Pak Technical Info


USD 8.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Do away with the thread adapter; special line brushes thread right onto dewey coated rods. Eliminates the need to constantly change adapters; no more hunting for a misplaced adapter. Special line brushes have the best phosphor bronze wire bristles for long life and thorough cleaning. A one-piece, looped and wound, brass shank and coupler prevents any chance of putting a scratch in that all-important barrel. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3β½ (8.5cm) oal. Pistol: 2-3⁄8 (6cm) oal. Calibers .22 to 6.5mm have 8-36 female threads. Calibers .270 to .50bmg have 12-28 female threads. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-418-001.

More Details : click here

SEARCH this site : click here

Brownells Standard Line Bronze Bore Brushes 1 Dozen .30 Rifle Technical Info
Brownells Standard Line Bronze Bore Brushes 1 Dozen .30 Rifle Technical Info


USD 15.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze bore brushes, best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: brownells specs: bristles: available in bronze. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16&quot. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-401-030.

More Details : click here

SEARCH this site : click here

Sinclair International Bronze Bore Brush (Rifle) /375 Cal Technical Info
Sinclair International Bronze Bore Brush (Rifle) /375 Cal Technical Info


USD 3.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Sinclair bronze bore brushes are manufactured significantly larger than bore diameter to fit your barrel properly and have a closed loop on the end. Many other brushes are undersized and don't do an adequate job of scrubbing the barrel. Mfg: sinclair international. High quality gun cleaning bore brushes by Sinclair. Manufacturer item ID: B375.

More Details : click here

SEARCH this site : click here

Brownells "special Line" Brass Core Bore Brush 6.5mm Rifle Per Dozen Technical Info
Brownells "special Line" Brass Core Bore Brush 6.5mm Rifle Per Dozen Technical Info


USD 20.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-066.

More Details : click here

SEARCH this site : click here

Brownells "special Line" Brass Core Bore Brush .17 Rifle/Pistol 5 40 Tpi Per Dozen Technical Info
Brownells "special Line" Brass Core Bore Brush .17 Rifle/Pistol 5 40 Tpi Per Dozen Technical Info


USD 27.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-017.

More Details : click here

SEARCH this site : click here

Brownells Standard Line Nylon Bore Brushes 3 .22 Pistol Technical Info
Brownells Standard Line Nylon Bore Brushes 3 .22 Pistol Technical Info


USD 5.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-420-121.

More Details : click here

SEARCH this site : click here

Brownells Double Tuff Bore Brush Fits .416 Rifle Dozen Technical Info
Brownells Double Tuff Bore Brush Fits .416 Rifle Dozen Technical Info


USD 27.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-144-417.

More Details : click here

SEARCH this site : click here

Brownells "special Line" Dewey Thread Bore Brush Fits 6.5mm Rifle Dozen Technical Info
Brownells "special Line" Dewey Thread Bore Brush Fits 6.5mm Rifle Dozen Technical Info


USD 24.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Do away with the thread adapter; special line brushes thread right onto dewey coated rods. Eliminates the need to constantly change adapters; no more hunting for a misplaced adapter. Special line brushes have the best phosphor bronze wire bristles for long life and thorough cleaning. A one-piece, looped and wound, brass shank and coupler prevents any chance of putting a scratch in that all-important barrel. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3β½ (8.5cm) oal. Pistol: 2-3⁄8 (6cm) oal. Calibers .22 to 6.5mm have 8-36 female threads. Calibers .270 to .50bmg have 12-28 female threads. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-418-066.

More Details : click here

SEARCH this site : click here

Brownells "special Line" Brass Core Bore Brush .475/.480 Revolver Per 3 Technical Info
Brownells "special Line" Brass Core Bore Brush .475/.480 Revolver Per 3 Technical Info


USD 6.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-480.

More Details : click here

SEARCH this site : click here

Otis Bore Brushes Brass Bore Brushes 10 Pak Fits .243/.25/6mm/6.5mm Technical Info
Otis Bore Brushes Brass Bore Brushes 10 Pak Fits .243/.25/6mm/6.5mm Technical Info


USD 13.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Hard-scrubbing brushes strip fouling quickly, leaving the bore sparkling clean. Premium-quality phosphor bronze bristles have twice the fill and a much longer life than generic brushes, with bristles all the way to the tip. More bristles mean fast, thorough cleaning. Stem is cold welded to the looped-and-wound brass core to withstand up to 200 lbs. Of pull force without separating. All models are threaded to fit standard 8-32 rods and precision machined to ensure a clean starter thread so the brush screws on the rod easily. Caliber stamped on the stem, so you can be sure you always have the correct-size brush for your gun. Some calibers available with nylon bristles for jobs requiring less a mfg: otis specs: brass wire shank, bronze or nylon bristles. Approximately 21⁄8" (5.4cm) long. Standard 8-32 tpi threads. Pistol/rifle brushes sold in 10 paks, each brush in individual plastic tube. High quality gun cleaning bore brushes by Otis. Manufacturer item ID: FG325BP.

More Details : click here

SEARCH this site : click here

Brownells Standard Line Bronze Bore Brushes 1 Dozen .17 Cal. Rifle Technical Info
Brownells Standard Line Bronze Bore Brushes 1 Dozen .17 Cal. Rifle Technical Info


USD 15.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze bore brushes, best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: brownells specs: bristles: available in bronze. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16&quot. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-401-008.

More Details : click here

SEARCH this site : click here

Brownells Double Tuff Bore Brush Fits .243 Rifle Pak 3 Technical Info
Brownells Double Tuff Bore Brush Fits .243 Rifle Pak 3 Technical Info


USD 6.99
(Indicative price - actual current price possibly lower)


Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-144-243.

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : Gun Cleaning Bore Brushes Technical Info : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB





    Try Search on this site - find exactly what you need! Click below:





    Item on this page: Brownells Double Tuff Bore Brush Fits .44/.45 Pistol Dozen Technical Info



    Home Page Search Products Contact Us Privacy Policy



    Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI