Brownells Double Tuff Bore Brush Fits .35/.38 Spec/.357 Pistol Dozen Technical Info
Gun Cleaning Bore Brushes by Brownells
|
Item technical details & specifications: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-142-138.
 Indicative Price: USD 23.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Standard Line Nylon Bore Brushes 1 Dozen .50 Bmg Rifle Technical Info
USD 4.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-420-050.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .22 Rifle 8 36 Tpi Per 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-018.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Bronze Bore Brushes 3 .17 Cal. Rifle Technical Info
USD 5.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze bore brushes, best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: brownells specs: bristles: available in bronze. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-401-007.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Bronze Bore Brushes 1 Dozen .270 Rifle Technical Info
USD 15.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze bore brushes, best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: brownells specs: bristles: available in bronze. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-401-027.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 1 Dozen .35/.38 Special/.357 Rifle Technical Info
USD 19.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-420-035.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .338 Rifle Per 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-032.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 1 Dozen .22 Centerfire Rifle Technical Info
USD 19.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-420-004.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Double Tuff Bore Brush Fits .30 Rifle Pak 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-144-300.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Heavy Weight Nylon Bore Brush .22 Rimfire Rifle 3 Pak Technical Info
USD 9.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Super-aggressive, nylon brush makes short work of stubborn bore deposits. Extra-stiff, large diameter bristles are safe on rifling and smoothbore surfaces. Won't deteriorate when used with your favorite solvent. Strong, one-piece, looped and wound brass shank and coupling prevents scratching. Mfg: brownells specs: bristles: heavy weight (hw) nylon. Shank: brass, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-444-002.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .40 Smith & Wesson/.41/10mm Pistol Per 3 Technical Info
USD 6.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. High quality gun cleaning bore brushes by Brownells. Manufacturer item ID: 084-405-140.
More Details : click here
SEARCH this site : click here
|
|
|
Otis Bore Brushes Brass Bore Brushes 10 Pak Fits .270/.284/6.8mm/7mm Technical Info
USD 12.99
(Indicative price - actual current price possibly lower)
Gun Cleaning Bore Brushes Technical Info
Item technical details & specifications: Hard-scrubbing brushes strip fouling quickly, leaving the bore sparkling clean. Premium-quality phosphor bronze bristles have twice the fill and a much longer life than generic brushes, with bristles all the way to the tip. More bristles mean fast, thorough cleaning. Stem is cold welded to the looped-and-wound brass core to withstand up to 200 lbs. Of pull force without separating. All models are threaded to fit standard 8-32 rods and precision machined to ensure a clean starter thread so the brush screws on the rod easily. Caliber stamped on the stem, so you can be sure you always have the correct-size brush for your gun. Some calibers available with nylon bristles for jobs requiring less a mfg: otis specs: brass wire shank, bronze or nylon bristles. Approximately 21⁄8" (5.4cm) long. Standard 8-32 tpi threads. Pistol/rifle brushes sold in 10 paks, each brush in individual plastic tube. High quality gun cleaning bore brushes by Otis. Manufacturer item ID: FG327BP.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Double Tuff Bore Brush Fits .35/.38 Spec/.357 Pistol Dozen Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
