Brownells .146' 48' Taps .146" 48 Taper Tap Technical Info
Gunsmith Taps by Brownells
|
 Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Barrel/Receiver Taps Rem. 700 Tap Technical Info
USD 86.99
(Indicative price - actual current price possibly lower)
Gunsmith Taps Technical Info
Item technical details & specifications: Clean and chase dinged or imperfect threads, either on the barrel or in the receiver. Real lifesavers for any rebarreling job, especially good when installing any of our "no-lathe", pre- threaded barrels. Thanks to walt warren for his suggestion. Mfg: brownells specs: high speed steel. .980"-12 tpi fits small ring mauser (plug tap cuts full-depth threads on small ring 98s with internal shoulders); 1.00"-16 tpi fits fn-fal; 1.10"-12 tpi fits large ring mauser; 11⁄16"-16 tpi fits remington 700 and xp-100; 1.055"-20 tpi. High quality gunsmith taps by Brownells. Manufacturer item ID: 41569.
More Details : click here
SEARCH this site : click here
|
|
|
Reiff & Nestor Company "perfect Cut" Premium Tap 6 40 Bottom Two Flute Tap Technical Info
USD 4.99
(Indicative price - actual current price possibly lower)
Gunsmith Taps Technical Info
Item technical details & specifications: Not magic, just perfect! when we first tried these taps (recommended by customer dan baldwin), we thought they were extra hard, coated or treated somehow . . . They're that much better than any tap we've ever used before. But, the u.S. Company that's been making them since 1912 says the secret is plain old care and quality control. The ground threads are held to incredibly tight tolerances for roundness, thread spacing, etc. Result is, all the teeth cut equally so the whole tapping process goes faster, the taps last longer, breakage is cut way down and the threads are the finest you'll ever see. Try them; you'll tap more holes per tap than you thought possible! premi mfg: reiff & nestor company specs: h-2, high speed tool steel. High quality gunsmith taps by Reiff & Nestor. Manufacturer item ID: 12323.
More Details : click here
SEARCH this site : click here
|
|
|
Reiff & Nestor Company "perfect Cut" Premium Tap 3 56 Plug Two Flute Tap Technical Info
USD 14.99
(Indicative price - actual current price possibly lower)
Gunsmith Taps Technical Info
Item technical details & specifications: Not magic, just perfect! when we first tried these taps (recommended by customer dan baldwin), we thought they were extra hard, coated or treated somehow . . . They're that much better than any tap we've ever used before. But, the u.S. Company that's been making them since 1912 says the secret is plain old care and quality control. The ground threads are held to incredibly tight tolerances for roundness, thread spacing, etc. Result is, all the teeth cut equally so the whole tapping process goes faster, the taps last longer, breakage is cut way down and the threads are the finest you'll ever see. Try them; you'll tap more holes per tap than you thought possible! premi mfg: reiff & nestor company specs: h-2, high speed tool steel. High quality gunsmith taps by Reiff & Nestor. Manufacturer item ID: 10922.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells .146' 48' Taps .146" 48 Taper Tap Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
