Bradley Gunsight Sight Beads Brass Skirted Bead 1/16" 3 56 Tpi Dull Silver 3 Pak Technical Info
Shotgun Front Sights by Bradley
|
Item technical details & specifications: Standard bradley, places the front sight bead on a block of steel for positive indexing, greater surface area and increased strength. Available in red and white colored plastic or gold brass beads. Metric bradley, beads are all white in color. Solid brass bradley, uniform yellow brass (gold) or white brass (silver) beads with or without positive-stop skirts. Mfg: bradley gunsight specs: standard base, steel, blue. Bead, plastic, red or white. Brass beads, gold or silver. High quality shotgun front sights by Bradley. Manufacturer item ID: MB03.
 Indicative Price: USD 9.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Hiviz Interchangeable Front Sights Rt2008 Ruger Taper Barrel Front Sight Technical Info
USD 31.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Gl2009-215, interchangeable front glock sight. .215" height. Includes 6 litepipes of in red and green, carrying case and key to interchange litepipes. Increased height to fit many aftermarket rear sights. Fits all glock models except ported or compensated models. Rt2008, ruger taper barrel front sight. Interchangeable style. Includes 6 litepipes in red and green, carrying case and a key to interchange the litepipes. Fits tapered barrel tarrget model with adjustable rear sight. Height of sight from barrel up is .526". Hk2008f, heckler & koch interchangeable front sight. Fits h&k usp full size calibers. 45 acp, .357 sig, 40 s&w, 9mm (height mfg: hiviz. High quality shotgun front sights by Hiviz. Manufacturer item ID: RT2008.
More Details : click here
SEARCH this site : click here
|
|
|
Necg Shotgun Sight Bead 4mm Ivory Sight Bead Technical Info
USD 14.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: This meticulously crafted front bead is made from genuine mammoth ivory to give a fine shotgun the look of traditional elephant ivory, without violating international trade restrictions. Practical, too, because it gives a clean, easy-to-see, glare-free, white dot in all light conditions. Mfg: necg specs: turned mammoth ivory, natural finish. .157" (4mm) dia. Bead. Undersized 6-48 thread, secure with epoxy adhesive. High quality shotgun front sights by NECG. Manufacturer item ID: 4MM.
More Details : click here
SEARCH this site : click here
|
|
|
Truglo Glo Dot Xtreme Sight Glo Dot Xtreme Technical Info
USD 23.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Magnetically attached, highly visible fiber optic sight provides exceptional sight acquisition in all light conditions. Features four different bases with different internal mounting dimensions that fit a variety of ventilated ribs. Polymer base snaps onto the rib and is held firmly in place with a high-strength magnet for quick installation without screws. Includes one red, green, yellow, and amber fiber optic rod. Rods are easily interchanged using thumb and finger pressure. Notch in base uses factory bead to locate sight correctly along bore axis. Two sets of magnets allow mounting sights on two shotguns with different width ventilated ribs.Universal fit for all shotguns equipped with mfg: truglo specs: bases, plastic, black. (1) .260" (6.5mm), (1).330" (8.4mm), (1) .420" (10.7mm), (1) .520" (13.2mm) internal dimension. 2" (5.1cm) long. Rods, polymer, (1) red, (1) green, (1) yellow, (1) amber. 113/16" (2cm) long x .060" (1.5mm) dia. Include. High quality shotgun front sights by Truglo. Manufacturer item ID: TG90X.
More Details : click here
SEARCH this site : click here
|
|
|
Marble Arms Tritium Shotgun Sight 5x40 Sight Technical Info
USD 34.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Cnc-machined, steel sight uses eye-catching tritium to provide a fast sight picture in low light and an easily-noticeable, white ring for regular light. White ring is recessed to protect it from being scratched and to ensure proper light reflection from any angle. Available in four different thread diameters to fit your shotgun. Mfg: marble arms specs: steel, blued, matte finish. Approximately .32" (8.1mm) long, 3/16" (4.8mm) wide, .21" (5.4mm) high. 3/32" (2.4mm) shank length. See price line for thread diameter. 6-48 oversize (os) has a diameter of .146" (3.7mm) which requires a .146x48 tap. High quality shotgun front sights by Marble. Manufacturer item ID: 54019.
More Details : click here
SEARCH this site : click here
|
|
|
Xs Sight Systems Shotgun Big Dot Tritium Front Sight Remington Pedestal Big Dot Tritium Technical Info
USD 63.9
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Highly visible, tritium dot front sight surrounded by a large white ring epoxies over the existing front bead sight to help improve target focus and low light sight acquisition and sight recovery after muzzle flash. Installs over front sight beads from .125", .140" diameter by filling the cavity on the underside of the sight with brownells acraglas gel, then pressing the sight over the bead and allowing it to fully cure. If existing bead is too small or too large, replace with brownells #6 bead for 3-56 threads or #26 for 6-48 threads. Some shotgun barrels may require drilling and tapping of existing hole to 6-48 for installation of #26 brownells bead. Remington pedestal model with stepped mfg: xs sight systems specs: machined steel, black, matte finish. Big dot .161" (4mm) diameter. Fits beads from .125" (3.2mm) to .140" (3.5mm). Remington pedestal fits remington front sight pedestals. Vent rib fits ventilated ribs. Plain barrel fits round barrels. Includes instructions. High quality shotgun front sights by XS. Manufacturer item ID: SG20013.
More Details : click here
SEARCH this site : click here
|
|
|
Hiviz Magnetic Base Sights S200 R Magnetic Base Sight Red .171" To .265" Technical Info
USD 14.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Magnetic base sight. M-series, includes 4 litepipes, 2 red, 2 green. M200: fit ribs from .171", .265" (11/64, 17/64"; 4.2 mm, 6.7 mm). Fits beretta: 686 & 687 models with ultra narrow rib, al390, a304, al390 field, 391 urika field; browning: gold series, 28 gauge and .410 citori; sigarms: sa-3 hunter, sa-5 upland; benelli: 20 gauge m300: fits ribs from .218" -.328" (7/32, 21/64"; 5.5 mm, 8.3 mm). Fits remington: all field models; browning: gold 10 gauge, bps, auto-5; beretta: comp., t & st ribs, pintail auto; ruger: red label field guns; ithaca: model 37 & other models: benelli: super black eagle & all field guns; franchi: mfg: hiviz. High quality shotgun front sights by Hiviz. Manufacturer item ID: S200R.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Shotgun Sight Beads For Vent Ribs & Plain Barrels No. 10d Front (Screw In) W/Wrench Technical Info
USD 8.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Lyman ivory-like shotgun beads are oversized and easy to see under any light conditions. Modern materials give the same consistent sight picture characteristics and time-tested visual cues as traditional ivory beads that have been used on shot guns for many years. Can be fitted in minutes. Necessary tools including drills, taps and reamers are sold elsewhere on this site.Number 10 front sight, press fit for installation on rib of double or single barrel guns. Sight installation requires hole drilled with number 29 bit and then taper reamed to specific depth. Start sight with hand pressure and finish with driven hardwood. Bead diameter is approximately .140 inch. Can be secured with adhe mfg: lyman. High quality shotgun front sights by Lyman. Manufacturer item ID: 3101012.
More Details : click here
SEARCH this site : click here
|
|
|
|
Hiviz Magnetic Base Sights S300 R Magnetic Base Sight Red .218" To .328" Technical Info
USD 14.99
(Indicative price - actual current price possibly lower)
Shotgun Front Sights Technical Info
Item technical details & specifications: Magnetic base sight. M-series, includes 4 litepipes, 2 red, 2 green. M200: fit ribs from .171", .265" (11/64, 17/64"; 4.2 mm, 6.7 mm). Fits beretta: 686 & 687 models with ultra narrow rib, al390, a304, al390 field, 391 urika field; browning: gold series, 28 gauge and .410 citori; sigarms: sa-3 hunter, sa-5 upland; benelli: 20 gauge m300: fits ribs from .218" -.328" (7/32, 21/64"; 5.5 mm, 8.3 mm). Fits remington: all field models; browning: gold 10 gauge, bps, auto-5; beretta: comp., t & st ribs, pintail auto; ruger: red label field guns; ithaca: model 37 & other models: benelli: super black eagle & all field guns; franchi: mfg: hiviz. High quality shotgun front sights by Hiviz. Manufacturer item ID: S300R.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Bradley Gunsight Sight Beads Brass Skirted Bead 1/16" 3 56 Tpi Dull Silver 3 Pak Technical Info
|
 Copyright © PrizeGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
